WL300A
01European Type
- Power
- 300 W
- Max head
- 6.5 m
- Max flow
- 100 L/min
- Protection
- IP54
01Sewage lifting devices
Sewage Lifting Solutions
Built for Global Projects
European 220–240V/50Hz and American 110V/60Hz platforms from one factory, with published power, flow and head figures for every model.
- Models
- 22
- Platforms
- 50 / 60Hz
- Station range
- 25–460L
Tank levelCYCLE
68%30%0%
Pump
Fill and discharge cycle shown schematically; not a measured curve.
02Product lines
Three lines, one production base
Pick the electrical platform your market runs on, or move to a buried station when building discharge exceeds a compact tank.
03Model finder
Find a model by platform and head
Filter the published range, then open the model page for the full parameter table and packing data.
22 models
WL450A
02European Type
- Power
- 450 W
- Max head
- 8 m
- Max flow
- 125 L/min
- Protection
- IP55
WL450C
03European Type
- Power
- 450 W
- Max head
- 8 m
- Max flow
- 125 L/min
- Protection
- IP55
WL550A
04European Type
- Power
- 550 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL600A
05European Type
- Power
- 600 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL600C
06European Type
- Power
- 600 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL600E
07European Type
- Power
- 600 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL750A
08European Type
- Power
- 750 W
- Max head
- 11 m
- Max flow
- 165 L/min
- Protection
- IP55
04Why Anteloy
What a buyer can check before ordering
Four claims that can be verified against the catalog, the parameter table or the factory record.
01
Two electrical platforms, one catalog
220–240V / 50Hz and 110V / 60Hz units are designed and produced as separate platforms, so an importer can cover both markets without a second supplier.
02
Separate water and electricity chambers
The motor and electrical parts sit in a chamber isolated from the wastewater volume, which keeps service access independent of the tank contents.
03
Published parameters, not adjectives
Power, maximum flow, maximum head and protection class are listed per model with the catalog as the reference, and unverified fields are marked instead of estimated.
04
Service and spares designed in
Float control, impeller and motor assembly are reachable without cutting the discharge line, which matters for installers handling warranty calls.
05Manufacturing
A factory record, not a distributor page
Plant area, building area and designed capacity are listed separately, with the measurement basis shown next to each figure.
Plant area
12,000m²
According to company data
Building area
15,000m²
According to company data
Designed capacity, single line
80,000units / year
Design figure, not output. Consistency with published material to be confirmed
01
Incoming inspection
Motor, impeller and tank parts are checked against the drawing before they enter the line.
02
Moulding and machining
Tank moulding and motor machining are carried out in-house on the same site.
03
Assembly
Pump, float control and electrical chamber are assembled and wired as one unit.
06Applications
Start from the drainage point
Each application page lists the drain conditions, the models that fit and the installation points to check.
07Certification
Documents held, not documents claimed
Certificate holder, issuing body, applicable models and validity are checked before any scan is published here.
Scan pending
Electrical safety certificate
VALIDITY TO BE CONFIRMED
Scan pending
Water contact material report
VALIDITY TO BE CONFIRMED
Scan pending
Export market conformity
VALIDITY TO BE CONFIRMED
Scan pending
Factory audit record
VALIDITY TO BE CONFIRMED
08Resources
Selection notes and the catalog
Catalog
2026 English catalog
Model range, parameter tables and packing information. Direct download, no form required.
Download CatalogEnglish · PDF, 9.2 MB
09 / Inquiry
Send the model and the site conditions
Include lift height, discharge route and supply voltage. The model field pre-fills when you arrive from a product page.
- To be confirmed
- To be confirmed
- Manufacturing site
- No.518 Yindong North Road, Yinzhou, Ningbo, China