WL300A
01European Type
- Power
- 300 W
- Max head
- 6.5 m
- Max flow
- 100 L/min
- Protection
- IP54
European Type Sewage Lifting Devices
European Type units run on 220–240V / 50Hz with 2850 RPM motor speed. They are the standard choice for residential and light commercial projects across the EU, the Middle East, Africa and Southeast Asia.
- Voltage
- 220–240V
- Frequency
- 50Hz
- Motor speed
- 2850 RPM
- Protection
- IP54 – IP55
02Models
8 models in this line
Open any model for the full parameter table, packing data and installation conditions.
WL450A
02European Type
- Power
- 450 W
- Max head
- 8 m
- Max flow
- 125 L/min
- Protection
- IP55
WL450C
03European Type
- Power
- 450 W
- Max head
- 8 m
- Max flow
- 125 L/min
- Protection
- IP55
WL550A
04European Type
- Power
- 550 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL600A
05European Type
- Power
- 600 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL600C
06European Type
- Power
- 600 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL600E
07European Type
- Power
- 600 W
- Max head
- 9.5 m
- Max flow
- 150 L/min
- Protection
- IP55
WL750A
08European Type
- Power
- 750 W
- Max head
- 11 m
- Max flow
- 165 L/min
- Protection
- IP55
03Comparison
Compare published ratings
Values are the catalog figures. Highlighted cells mark the highest published figure in each row.
| Parameter | WL300A | WL450A | WL450C | WL550A | WL600A | WL600C | WL600E | WL750A |
|---|---|---|---|---|---|---|---|---|
| Power | 300 W | 450 W | 450 W | 550 W | 600 W | 600 W | 600 W | 750 W |
| Max flow | 100 L/min | 125 L/min | 125 L/min | 150 L/min | 150 L/min | 150 L/min | 150 L/min | 165 L/min |
| Max head | 6.5 m | 8 m | 8 m | 9.5 m | 9.5 m | 9.5 m | 9.5 m | 11 m |
| Protection | IP54 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 |
| Tank volume | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote |
04Structure
Shared construction points
Described as structure, not as a claim of exclusivity.
01
Separate water and electricity chambers
Motor and electrical components sit in a chamber isolated from the collection tank, so the pump is not exposed to wastewater during normal operation.
02
Anti-tangle impeller
The impeller and cutting geometry are arranged to pass solids that normally block a conventional drainage pump.
03
Stainless steel core assembly
Motor shaft and impeller assembly use stainless steel, per the structure description in the 2026 English catalog.
05FAQ
Selection questions for this line
- How do I choose between European Type and American Type?
- By the supply on site. European Type units are built for 220–240V / 50Hz at 2850 RPM; American Type units are built for 110V / 60Hz at 3450 RPM. The platforms are not interchangeable.
- Which model suits a single basement bathroom?
- A compact unit in the 450W to 600W range normally covers one bathroom group. Confirm the measured lift and discharge route first, because line losses reduce the usable head.
- When should I use a DMJ station instead of a compact unit?
- When the discharge volume of the building exceeds what a compact tank can buffer, or when the project needs a buried collection tank. The DMJ range runs from 25L to 460L.